Welcome to our service center! We work for you!

Mon-Fri: 8:00am-6:00pm

0800 0434445

Built-in Tumble Dryer Repair Kempston

Services

Built-in Tumble Dryer Repair

There’s nothing worse, is there? You put your wet clothes in the tumble dryer and remove them an hour or two later only to discover they’re just as damp as when they went in.

Tumble Dryers With Re-Set Buttons

  • If your tumble dryer is not heating up, it’s likely that the heater has overheated and may have tripped and needs to be re-set.
  • The re-set button is usually situated on the rear of the tumble dryer, usually on the back panel.
  • To re-set the heat button on your tumble dryer, press in the red button. If it’s tripped you’ll hear a click.

Tumble Dryers Without Re-Set Buttons

  • Not all tumble dryers have re-set buttons, so if it stops heating it is most likely to be because the thermostat or TOC (Thermal Overload Cutout) has tripped due to overheating.
  • Thermostat’s are usually the size of a 5p and can be accessed by removing the back panel. Always switch off the power before working with any electrical part.
  • If you have one you can use a multimeter to test the thermostat’s resistance.

Get in Touch

You can contact us any way that is convenient for you. We are available 24/7 via fax or email. You can also use a quick contact form below or visit our office personally.
We would be happy to answer your questions.

Request Callback